Kona Process 153 longtermer

James' longterm relationship with the Kona Process 153 has sadly come to an end. See how his bike evolved in this final review

Brand:

Kona

Product:

Process 153

From:

Kona Bicycles (www.konaworld.com)

Price:

$3299

Tested:

by James for 10 months for Singletrack Magazine

Word count:

1,680

This is my final review of the Kona Process 153 longterm test bike. Out of the box, you may recall having previously seen the stock 2016 Kona Process 153 when it first looked like this;



Halfway through the test period, it then looked like this.
After 10 long months of riding the Process here (local Calderdale loops and hillside plummets), there (trips to the Scottish borders and highlands) and elsewhere (racing the Ard Rock enduro), it can be said that the 153 is one hell of a mountain bike. Kona have put together a complete package here. For holding on tight and going as fast as you dare, be that with a number-board on or simply pushing yourself and your grin further, messing about in the woods/uplift days or longer pedals up and down a few hills and across valleys, it is simply brilliant.
What has been a pleasant surprise is that for it’s travel and intentions, is that it has worked well for all sorts of rides, and not just throttling wide open in the rough stuff. Though it is dead-brilliant in this regard. Long, low and lovely. Great balance and poise, this is truly a well mannered and hugely capable bike.

There are a couple of things that I did early on and recommend. The main ones being that I fitted Bottomless Tokens to the Rock Shox PIKE fork, and I also setup the tyres tubeless. These are easy workshop jobs that do not take much time and deliver noticeable performance improvements.
Adding Tokens to the fork meant that sensitivity remained on smaller bumps and trail chatter, but an increased ramp up allowed the PIKE to better deal with the bigger hits. Along with the tubeless tyres and lower operating pressures, the Process 153 benefitted significantly from the improved control and grip.

Kona has spec’d the Process 153 well. One of the areas that they are to be applauded is the wheels, in particular the rims and tyres. Hooray for wide rims and quality tyres! Tubeless valves are included in the box, the WTB i29 rims come pre-taped and the MAXXIS Minion DHF tyres are also tubeless ready. As you can imagine, I didn’t hesitate to remove tubes, add sealant and inflate. This is an easy to do out of the box performance upgrade – all the better at gripping and cushioning.
Overall, the Kona Process 153 has been fuss free and easy to live with. There has been the usual scuff and scrape of the rear mech, and the odd bent hanger that’s needed tweaking. I’ve replaced the gear cable a couple of times, sliced the rear tyre and replaced worn out brake pads. All general wear and tear that you expect with riding a mountain bike. Fitting new gear cables with internal routing has been surprisingly fuss free.
The KS Lev dropper has worked well most of the time…

…for 9 months it’s been cycled up and down, up and down without issue and then just riding along (Ed; JRA huh??) a push on the KS Southpaw lever and…nothing. What happened? Looking inside a small part had failed. The arm where the cable secures had snapped. This was easy to fix and the post and myself were back to up and down again within a half hour.

Long, low and lovely. This bike’s got stance!

The standard specification is considered and suits the intention of the bike perfectly. There is nothing that needed changing straight away. The Kona-branded bar and stem are the correct dimensions, the brakes are strong and there’s a wide range drivetrain. And as already mentioned the WTB rims are good and wide, with the tyres being quality MAXXIS rubber.
For the £2999 asking price all is good. The linkage driven single pivot rear suspension is excellent. It’s sensitive to start, supportive in the mid-stroke and deals with big hits in a controlled manner with an increase in progression towards the end. It’s both comfortable and controlled. No complaints here, and it shows that Kona has clearly done its homework.

Masses of standover on the Process 153 frame.

The aluminium frameset is built to build to go the distance with big bearings and a stout chassis. It’s well put together, rides well and gives heaps of confidence to push on in unforgiving terrain. It’s low and out of the way, with generous standover clearance. It should be noted though that shoe clearance is a little on the tight side towards the back of the bike. The swingarm is spaced wide, and as such heels and calves can run pretty close. It’s noticeable, but thankfully this has not proved to be an issue for me in use.

The lighter, more compliant wheels and one more cog drivetrain is…different! The wheels are particularly interesting being more compliant vertically. And having 12 gears? Well the SRAM Eagle drivetrain was fitted just in time for the Ard Rock enduro. This is a big day out with a course that covers near enough 45 kilometers long with 1500 meters of elevation gain in one loop. The 1×11 GX drivetrain has worked well and provided a wide gear range for ups and downs alike with a 32t chainring and 10-42 11 speed cassette. But the extra 50t low gear of the Eagle cassette was a welcome option for the long gradual ups between stages. You can certainly mash your way up those climbs, but having the extra low gear really did help me to preserve my legs for sprinting during the actual race stages.

Shown above, the Stans BRAVO carbon wheels (reviewed in #107) helped to drop overall weight and also increased comfort thanks to their vertical compliance, which was surprisingly noticeable despite the 153mm of suspension travel on the Process. Also shown is the SRAM Eagle XO-1 1×12 drivetrain, that I grew to appreciate on bigger days out with a lower sit-and-spin gear option.

Parts aside, the Process 153 is an absolute charger. Swift to get up to speed and happy to stay there. It can be hustled along and hung on to when the going gets rough and it’s happy to spin up as well with a comfortable seated pedalling position. This bike flies. It’s a super fun ride. Playful and capable of serious speed.

Foot out, FLAT OUT!

Very much at home blasting rocky descents.

The Kona Process in two words? Good times! For high speed thrills and spirited riding, the 2016 Process 153 has been superb. An ideal mountain bike for racing enduro and aggressive trail riding and general hooning around.
For 2017? Fine tuning of a great recipe, the 153 is longer and slacker…faster and funner?! We’ll just have to wait and see…